3RLAB High Voltage Resistor Replacement FAQ: HVC HVR Series Alternative Solutions
Introduction: When searching for high voltage resistor alternatives, procurement managers and R&D engineers often face a triple challenge: lead times, cost, and technical compatibility. This FAQ aims to show you how the HVC HVR series serves as a reliable alternative solution for 3RLAB products, helping you resolve supply bottlenecks and optimize your supply chain structure.
Q1: Why should I consider an alternative brand for 3RLAB?
A: Most customers initiate replacement projects based on four key strategic considerations:
- Alleviating Lead Time Crisis: Some special 3RLAB models have lead times up to 12–16 weeks, severely delaying project schedules. HVC shortens standard product lead times to in-stock or 3–4 weeks through optimized inventory management.
- Reducing BOM Costs: Introducing HVC as a second supplier while maintaining equivalent electrical performance typically delivers significant cost savings, enhancing the market competitiveness of your final product.
- Managing Obsolescence Risk (EOL Management): When original models reach End of Life, HVC provides continuous reproduction and supply support, extending the service life of your equipment.
- Supply Chain Resilience: Establishing a “Dual-Source” strategy is an industry best practice for mitigating the risk of supply disruption from a single vendor.
Q2: What are the core technical advantages of the HVC HVR series?
A: The HVC HVR series is not a simple imitation—it is an upgraded solution based on European Ruthenium Oxide thick film technology:
- Excellent high-frequency characteristics: Low parasitic inductance design delivers cleaner waveforms in high-frequency pulse applications.
- High voltage withstand capability: Uses 96% high-purity alumina substrate with superior thermal performance, supporting higher overload voltages than same-size competitors.
- Long-term stability: After 1,000-hour high-temperature load testing, resistance drift is significantly below industry standards.
- Flexible termination options: Supports tin-plated copper wire, threaded terminals, or custom PCB mounting leads.
Q3: Practical Selection: How to achieve a seamless transition from 3RLAB to HVC?
A: To achieve a “Drop-in Replacement,” please refer to the following 9-point verification checklist:
- Resistance: Confirm nominal value and allowable tolerance (e.g., 100MΩ ±1%).
- Voltage Rating: Critical point. Verify both continuous working voltage (DC) and pulse voltage.
- Power Rating: HVC product power must be ≥ original model (e.g., if 3RLAB is 2W, HVC recommends 2W or 3W).
- Dimensions: Check length (L) and diameter (D) to ensure no interference with adjacent components.
- Lead Pitch: For PCB mounting, lead pitch must be identical.
- TCR (Temperature Coefficient): Precision applications require attention to whether 25 ppm or 50 ppm low-drift grade is needed.
- VCR (Voltage Coefficient): Linearity of resistance value at high voltages.
- Environmental Ratings: Operating temperature range (e.g., −55°C to +155°C).
- Non-Inductive Requirement: Is the application in a high-frequency pulse circuit? If so, specify the Non-Inductive version.
Selection Example: If you are using 3RLAB HTE52 (100MΩ, 5W), the HVC recommended replacement is HVRBSP52. Both have identical dimensions, and the HVC version offers a 10% improvement in voltage margin.
Q4: Which types of 3RLAB products can HVC replace?
A: HVC’s replacement solutions cover 3RLAB’s core product lines:
- Precision Axial: Corresponds to 3RLAB HTE/HS series. Used in voltage dividers and medical CT systems.
- High Power Tubular: Corresponds to 3RLAB UT series. Used in high-voltage power supplies and load banks.
- Flat/Chip: Corresponds to some surface-mount high voltage resistors.
- Pulse Rated: Designed for surge resistance, used in defibrillators or radar power supplies.
Q5: If standard products don’t fully match my requirements, does HVC offer customization?
A: Yes, customization is one of HVC’s core competencies.
We understand the diversity of high-voltage application scenarios. If the standard HVR series cannot meet your specific requirements (such as non-standard resistance values, ultra-high precision, special dimensions, or termination styles), the HVC engineering team can provide a customized design solution within 48 hours and quickly produce samples.
Q6: What should I do next?
A: Theory is no substitute for real-world testing. We recommend launching your replacement project with the following steps:
- Compile your BOM: List the complete 3RLAB part numbers you need to replace.
- Contact us: Send to [email protected].
- Obtain samples: HVC provides free samples for electrical performance and installation testing.
- Pilot run: Verify batch consistency and delivery speed.
Contact HVC technical team now to add a “double layer of protection” to your supply chain.
Cross Reference Tables
Cross Reference Table 1
| Part Number | Power (W) |
Working Voltage (kV) |
Length A (mm) |
Diameter B (mm) |
Lead Diameter C (mm) |
HVC Alternative Model |
|---|---|---|---|---|---|---|
| HTE15 | 0.7 | 2.5 | 15 | 5 | 0.8 | HVRBOP15 |
| HTE19 | 1.0 | 3.5 | 19 | 5 | 0.8 | HVRBOP19 |
| HTE25 | 1.2 | 5.5 | 25.4 | 5 | 0.8 | HVRBOP25 |
| HTE24 | 2.0 | 5.5 | 24 | 8 | 1.0 | HVRBSP24 |
| HTE39 | 3.0 | 10.0 | 39 | 8 | 1.0 | HVRBSP39 |
| HTE52 | 5.0 | 15.0 | 52 | 8 | 1.0 | HVRBSP52 |
| HTE76 | 7.5 | 22.5 | 76 | 8 | 1.0 | HVRBSP76 |
| HTE102 | 10 | 32.0 | 102 | 9 | 1.0 | HVRBSP102 |
| HTE127 | 12 | 40.0 | 127 | 9 | 1.0 | HVRBSP127 |
| HTE152 | 15 | 48.0 | 152 | 9 | 1.0 | HVRBSP152 |
| HS15 | 0.2 | 2 | 15 | 5 | 0.8 | HVRBOP15 |
| HS19 | 0.3 | 2.5 | 19 | 5 | 0.8 | HVRBOP19 |
| HS25 | 0.5 | 4.5 | 25.4 | 5 | 0.8 | HVRBOP25 |
| HS24 | 1.5 | 4 | 24 | 8 | 1 | HVRBSP24 |
| HS39 | 2.5 | 10 | 39 | 8 | 1 | HVRBSP39 |
| HS52 | 3.0 | 15 | 52 | 8 | 1 | HVRBSP52 |
| HS76 | 4.5 | 22.5 | 76 | 8 | 1 | HVRBSP76 |
| HS102 | 6 | 32 | 102 | 9 | 1 | HVRBSP102 |
| HS117 | 7 | 35 | 117 | 9 | 1 | HVRBSP117 |
| HS127 | 7.5 | 37 | 127 | 9 | 1 | HVRBSP127 |
| HS137 | 8 | 40 | 137 | 9 | 1 | HVRBSP137 |
| HS152 | 9 | 48 | 152 | 9 | 1 | HVRBSP152 |
| HS202 | 13.5 | 64 | 202 | 10 | 1 | HVRBSP202 |
| UR1 | 0.5 | 2 | 15 | 5 | 0.8 | HVRBOP15 |
| UR1.7 | 0.7 | 5 | 25.4 | 5 | 0.8 | HVRBOP25 |
| UR2 | 1 | 5 | 24 | 8 | 1 | HVRBSP24 |
| UR2.5 | 1.5 | 10 | 39 | 8 | 1 | HVRBSP39 |
| UR3 | 2 | 12 | 52 | 8 | 1 | HVRBSP52 |
| LTC 6-001 | 1 | 0.8 | 39 | 8 | 1 | HVRBSP39 |
| LTC 6-002 | 2 | 1.2 | 39 | 8 | 1 | HVRBSP39 |
| LTC 6-005 | 5 | 2 | 39 | 8 | 1 | HVRBSP39 |
| LTC 6-010 | 10 | 2.5 | 39 | 8 | 1 | HVRBSP39 |
| LTC 6-020 | 20 | 3 | 39 | 8 | 1 | HVRBSP39 |
| LTC 6-050 | 50 | 5 | 39 | 8 | 1 | HVRBSP39 |
| LTC 6-100 | 100 | 6 | 39 | 8 | 1 | HVRBSP39 |
| LTC10-001 | 1 | 1 | 52 | 8 | 1 | HVRBSP52 |
| LTC10-002 | 2 | 1.3 | 52 | 8 | 1 | HVRBSP52 |
| LTC10-005 | 5 | 2.2 | 52 | 8 | 1 | HVRBSP52 |
| LTC10-010 | 10 | 3 | 52 | 8 | 1 | HVRBSP52 |
| LTC10-020 | 20 | 3.5 | 52 | 8 | 1 | HVRBSP52 |
| LTC10-050 | 50 | 7 | 52 | 8 | 1 | HVRBSP52 |
| LTC10-100 | 100 | 10 | 52 | 8 | 1 | HVRBSP52 |
| LTC10-150 | 150 | 10 | 52 | 8 | 1 | HVRBSP52 |
| LTC15-002 | 2 | 1.7 | 76 | 8 | 1 | HVRBSP76 |
| LTC15-010 | 10 | 3.5 | 76 | 8 | 1 | HVRBSP76 |
| LTC15-020 | 20 | 4.5 | 76 | 8 | 1 | HVRBSP76 |
| LTC15-050 | 50 | 8 | 76 | 8 | 1 | HVRBSP76 |
| LTC15-100 | 100 | 12 | 76 | 8 | 1 | HVRBSP76 |
| LTC15-200 | 200 | 15 | 76 | 8 | 1 | HVRBSP76 |
Cross Reference Table 2
| Part Number | Power (W) |
Working Voltage (kV) |
Length L (mm) |
Width B (mm) |
OD ø (mm) |
ID D (mm) |
Thread G | HVC Alternative Model |
|---|---|---|---|---|---|---|---|---|
| UT 35 | 35 | 30 | 110 | 33 | 32 | 18 | M6 | HVRPFS110 |
| UT 50 | 50 | 48 | 160 | 33 | 32 | 18 | M6 | HVRPFS160 |
| UT 70 | 70 | 65 | 210 | 33 | 32 | 18 | M6 | HVRPFS210 |
| UT 100 | 100 | 100 | 310 | 33 | 32 | 18 | M6 | HVRPFS310 |
| UT 150 | 150 | 100 | 310 | 45 | 42 | 21 | M6 | HVRPFS310 |
Contact & Technical Support
If you are looking for replacements for 3RLAB discontinued series, or have any requirements for high voltage resistor selection or customization, HVC’s replacement engineering team is ready to support you at any time.
- Business Inquiry Email: [email protected]
- Official Website: https://hv-caps.com/High_Voltage_Resistors_Replacement_EBG_Ohmite/2025/1211/49327.html
We are committed to providing free sample testing and factory-level technical support for all replacement projects, jointly advancing the continuous development of high-voltage technology.
Disclaimer: 3RLAB® is a registered trademark of its respective owners. This document is intended for technical comparison and replacement selection reference only and does not imply any affiliation between HVC and the brand.